Back

Home

Next

RUCKSTELL AXLE PARTS, CONT.

Part Number

Description

Price

CLICK TO ENLARGE

CLICK IMAGES TO ENLARGE

CLICK IMAGES TO ENLARGE
*P156E Ruckstell Housing (13-19) (Exchange) Machined for early Drive Shaft Spool 530.00
*P156 Ruckstell Housing (19-25) (Exchange) 475.00
*P156C Ruckstell Housing (26-27) (Exchange) 485.00
*P158A Shift lock assembly (13-25) 270.00
*P158C Shift lock assembly (26-27) 405.00
P158CP Spring tension Adj. plug (for P158C)   (26-27) 4.50
P158CRS Shifting fork pin & roller set (for P158C) (26-27) 13.25
P158-BS Mounting bolt set for P158, brass body 9.00
*P158A-BS Mounting bolt set for P158A, cast iron body 10.00
*P158C-BS Mounting bolt set for P158C, large(26-27) 11.00
*P159 Ring gear support (bell housing) 105.00
P160 Differential & gear support (Part of P202) 138.00
P160BS Bronze bushing set (3)
(Use to rebush worn pin holes in P160)
11.00
P163 Spring (for P117) 4.00
P163B Spring (for P117B) 4.50
P164A Locking screw set (for P147) 4.50
*P171A Thrust washer, steel (order P/N 2529) 5.25
NOTE: The original P171A fiber washer should be replaced with a ford 2529 steel washer which provides a better bearing surface. Replace the P143 pins in P159 with longer pins to prevent both inner and outer steel washers from rotating. Install pins so that ends are just under flush with the surface of the thrust washers.
P171SH-A Thrust washer shim, 0.010 In.
(order 2529SH-A)
3.00
P171SH-B Thrust washer shim, 0.015 In.
(order 2529SH-B)
3.50
*P189A Shift lever, original type, cast bracket and knob 145.00
*P189B Shift lever, left hand, W/pillow blocks & knob 94.00
P193A Shift lock arm spring (for P98A & P98C) 4.00
P200 Cup washer, Oil seal (for P98A & P98C) 3.50
P200S Seal (used with P200) 0.30
*P202 Ruckstell Differential Assembly
(includes, P141, P160, & P43/135S)
226.00
*P206 Shift rod support 22.00
*P211 Ball bearing (Used with P139) 88.00
*2500RP Ruckstell Axle data plate 5.25
*R1 Ruckstell Axle repair guide 12.00
*Parts included in the Ruckstell Axle Kit*